Do composite decks get too hot in Texas?

Updated September 30, 2026 · 6 min read · Written by the DeckDebut team

Yes. On a 90°F Central Texas afternoon, dark composite decking in full sun is reported to reach 140–170°F — hot enough to be genuinely painful barefoot. Pressure-treated wood runs cooler, around 110–125°F. Colour matters more than brand: light boards and capped PVC can run 30–35°F cooler than dark composite on the same day.

This is the question showrooms are worst at answering, because the honest answer is unhelpful to whoever is holding the sample. A composite board feels lovely in an air-conditioned showroom in February. The same board, in the same colour, on the south side of a house in Pflugerville in July, is a different product.

So here is the straight version, and what to do about it — because "buy wood instead" is not the only answer, and usually not the right one.

How hot is too hot?

Human skin starts to feel pain at roughly 111°F and can burn with sustained contact above about 140°F. That is the number to hold in your head, because a lot of decking sits above it on a Texas afternoon.

SurfaceReported temp on a 90°F dayBarefoot?
Dark composite or dark capped composite140 – 170°FNo — painful within seconds
Mid-tone composite125 – 145°FBriefly, uncomfortably
Light composite and capped PVC110 – 135°FUsually tolerable
Pressure-treated pine110 – 125°FUsually tolerable
Light-coloured PVC with heat-reflective technology105 – 125°FYes
Reported ranges from manufacturer and independent testing. Real surfaces vary with sun angle, airflow beneath the deck, and humidity.

Why composite runs hotter than wood

Two reasons, and neither is a manufacturing defect.

  • Density. Composite is wood flour bound in plastic and is considerably denser than pine. More mass absorbs more solar energy and stores it for longer.
  • Colour. Composite is sold in the rich browns and greys people want — and dark pigment absorbs more of the sun that hits it. Pressure-treated pine is pale by default, which is most of its thermal advantage.

That second point is the useful one, because it is the one you control. A light composite board and a dark composite board from the same line, same price, same warranty, can differ by 30°F or more underfoot.

The four things that actually change deck temperature

In rough order of how much difference they make:

  1. 1

    Board colour

    The single biggest lever, and free. Going from a dark walnut to a light grey or sand within the same product line can cut surface temperature by 30–35°F without changing the price.

  2. 2

    Shade

    A pergola, an awning, or an existing live oak changes the equation more than any material choice. A shaded composite deck is cooler than a sun-baked wood one. If you are planning shade anyway, board colour matters much less.

  3. 3

    Material family

    Capped PVC generally runs cooler than capped composite of the same colour because it is less dense. Some lines add heat-reflective technology to the cap specifically for hot climates.

  4. 4

    Orientation and airflow

    A west-facing deck takes the worst of the afternoon sun. A deck raised on piers with air moving underneath sheds heat faster than one built tight to a slab.

So should you just use wood?

Usually no. Pressure-treated pine is genuinely cooler underfoot, and that is a real advantage. It is also the material that needs cleaning and re-sealing every year or two in this climate, splinters as it ages, and moves with the seasons. The Central Texas sun that makes composite hot is the same sun that destroys an unmaintained wood deck.

The better trade is usually light-coloured composite or PVC plus shade, which gets you a surface you can stand on and a deck you do not have to refinish every spring. Choose a dark board only if the deck is shaded, north-facing, or you genuinely expect to wear shoes on it.

How to check before you commit

  • Ask your builder or supplier for a full-size sample, not a three-inch chip, and leave it in your yard in the actual spot for an afternoon.
  • Check it at 4pm, not noon — the hottest surface reading usually comes later than people expect.
  • Stand on it barefoot. Every number in this article is a proxy for that one test.
  • Compare two colours from the same line side by side. The difference will surprise you.

Common questions

Does composite decking get hotter than wood?
In the same colour, yes — composite is denser and absorbs more solar energy. But most of the gap in practice is colour, not material: light composite and pressure-treated pine end up within about 10°F of each other, while dark composite can be 40°F hotter than both.
Which decking stays coolest in the Texas sun?
Light-coloured capped PVC, particularly lines using heat-reflective cap technology. After that, light composite, then pressure-treated pine. Dark boards of any material are the hottest option.
Will a composite deck burn my dog's paws?
It can. Dog paw pads are more heat-tolerant than human skin but not immune, and 150°F+ surfaces cause burns. The usual advice applies: if you cannot hold the back of your hand on it for seven seconds, it is too hot for your dog.
Does a lighter colour mean the deck shows dirt more?
Somewhat, though less than people expect with capped boards — the cap is non-porous, so dirt sits on the surface and rinses off. Central Texas cedar pollen shows on everything regardless of colour.
Do deck misters or cooling coatings work?
Misters help the air more than the surface. Paint-on coatings marketed for deck cooling do measurably reduce surface temperature but need reapplying, which reinstates the maintenance cycle composite was chosen to avoid. Shade and colour remain the better answers.

Keep reading